![]() Type in a name for the rule in the Description.ī. Go to Firewall -> Rule select Enable Firewall and tick Allow then click Save.Ī. What’s more, you can also select the certain time to get onto the Internet, specify the Start Time and Stop Time yourself, here we set the period as 00:00~06:00. You can select the certain day (s), or choose Each day. Select the Day mode, then enter a brief description of the rule you are setting up. Go to Firewall -> Schedule and click Add New. ![]() And type the IP range or specific one which you want to block in IP Address bar. Select the IP Address in Mode field, then enter a brief description of the rule you are setting up, here we take LAN as example. Go to Firewall -> LAN Host and click Add New. Go to System Tools-> Time Settings-> Get from PC-> Save. The Firewall settings are based on the modem’s time, rather than PC’s, so firstly we should adjust the modem’s time consisting with the PC’s. If you cannot open this page, please click here for more instruction. When you are prompted, enter the router´s username and password (the default username and password are both admin). Open your web browser and type the LAN IP address of the router in the address bar (the default IP address of TP-Link Modem router is http: //192.168.1.1.), then press Enter. ![]() Login to Modem Router’s configuration page. They are:Īfter having the above information, you can start the configuration on TD-W8968. ![]() This FAQ explains how to configure it, by an example given belowīlock a computer whose IP is 192.168.1.100 to access the Internet from 00:00 to 06:00Īccording to the purpose above, some necessary Parameters should be needed and clarified during the whole configuration process. Note: This article applies to TD-W8968 V1/V2,not TD-W8968 V3 if it ’s V2, We will take TD-W8968 V1 as example in this article.The steps are the same for other listed models.įirewall can be used to control user’s access to the Internet.
0 Comments
Leave a Reply. |